The Kobe IW500 air Impact wrench is suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminium, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it’s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas. Technical Specification No load speed - 7000RPM Maximum torque - 380Nm Air inlet thread - 1/4" NPT Air pressure - 90PSI / 6.2bar Air consumption - 4CFM* Sound pressure level - 88dB(A) Vibration level - 4.2m/s² Overall length - 185mm Overall width - 65mm Overall height - 190mm Minimum compatible hose size - 10mm Square drive size - 1/2in Weight - 2300g Based on a 15 second cycle per minute average use.
This is your website preview.
Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.
The Kobe IW500 air Impact wrench is suitable for t...
2021-03-26T08:18:57
The Kobe IW500 air Impact wrench is suitable for the rapid removal or installation of threaded fasteners. The housing is manufactured from a single piece of aluminium, for increased strength and durability. The housing has a rubber shroud around the square drive to protect the surface of the work piece from accidentally impacts and a rear bumper to protect the tool when it’s not in use. Reverse gear is selected easily at the press of a button conveniently located above the 10 position throttle control. The short body length allows access into hard to reach areas. Technical Specification No load speed - 7000RPM Maximum torque - 380Nm Air inlet thread - 1/4" NPT Air pressure - 90PSI / 6.2bar Air consumption - 4CFM* Sound pressure level - 88dB(A) Vibration level - 4.2m/s² Overall length - 185mm Overall width - 65mm Overall height - 190mm Minimum compatible hose size - 10mm Square drive size - 1/2in Weight - 2300g Based on a 15 second cycle per minute average use.
2021-03-26T08:18:57
Keywords
- dB
- Nm
- PSI
- NPT
- RPM
- CFM
- bar
- tool
- areas
- cycle
- button
- access
- surface
- housing
- load speed
- work piece
- durability
- rear bumper
- Air pressure
- Reverse gear
- rapid removal
- rubber shroud
- Overall width
- Overall length
- Overall height
- Maximum torque
- Air consumption
- Vibration level
- Air inlet thread
- short body length
- Square drive size
- minute average use
- increased strength
- Sound pressure level
- position throttle control
- single piece of aluminium
- Minimum compatible hose size
- Kobe IW500 air Impact wrench
- installation of threaded fasteners
Submit Your Enquiry